April 1st, 2011
Slings are available in different sizes, different materials and different widths. You can buy slings in single, two, three and four leg form. Below are the different types of slings that are available.
Roundslings
Roundslings are an endless loop of yarn which are covered by a woven tubular jacket. One advantage to round slings is that all of the load-bearing yarns are protected by this jacket. Round slings use polyester load yarns that are protected by a double wall, polyester cover. Sizes larger than this use an abrasion-resistant nylon, double wall jacket. All round sling jackets are color-coded along industry standards to indicate their capacity rating. While the standard configuration is endless, they are also available in eye & eye and braided styles.
Most roundslings have high strength, Aramid fibers for their load bearing yarns. These slings are the strongest and lightest slings in the world, with the lowest sling weight per capacity rating. Orange colored, double wall jackets for all sizes indicate that these slings have Aramid load bearing yarns. Tuff-Tags are standard on these, and all synthetic slings.
Wire Rope Slings
Wire Rope Slings are mainly found at construction sites because of their low cost and resistance to abrasion in construction work environments. High tensile strength steel wires are combined in various constructions to form ropes with specific characteristics. Standard constructions for slings are referred to as 6X19 or 6X36, designating the total number of wires being used. The greater the number of wires, the greater the flexibility and the lower the resistance to abrasion. Typical sling ropes use 6X19 in the smaller diameters and 6X37 at 1 ¼” diameter and larger.
Eye & Eye style slings are the most popular, but numerous end fittings are available to suit specific needs.
Chain Slings
The most appropriate type of sling that is used in extreme conditions where a normal sling would not last. Typical environment would be foundries and steel mills. Material used in chain slings is typically high strength alloy specific for the lifting industry.
Posted in Arbil Lifting Gear |
April 1st, 2011
Buying a snatch strap is not just a case of buying the first one that you see. Careful research needs to be conducted and it is imperative you purchase a snatch strap with the correct rating. A snatch strap whose breaking strength is light will break under the load it is pulling, whereas a strap that has a heavy breaking strength will be unable to stretch correctly, causing damage and stress to the recovery points and even injury.
A formula needs to be used when buying a snatch strap. This formula determines the correct minimum breaking strength of the strap. The correct strength should be between 2 and 3 times the gross vehicle mass of the lighter of the two vehicles being used in the recovery process. It is important that you only use industry standard equipment when recovering a vehicle and that the snatch strap is of the correct rating.
Never be under the misconception that you will never find yourself in dire straits stuck in mud. If you off road in your 4×4 then chances are you will get stuck. Having the snatch strap as part of your recovery gear will save the day and you will never leave home without one again.
Posted in Arbil 4x4 |
April 1st, 2011
K 1250 Rail Cutter
The petrol powered K1250 Rail is an entire rail cutter all the way from the engine to the cutting arm and fixture. This cutting saw is light, robust and flexible and does not compromise on quality, durability or reliability.
K 1260 Rail Cutter
With its 119cc (5.8kW) motor, the K 1260 is the world’s strongest rail-cutter. It also weighs in at 5kg less than its competitors in the same power class. The K 1260 Rail is capable of using both 14in and 16in blades. Fitted with double fixture attachments, this enables the operator to turn the machine and cut from the other direction. This means you can cut rails faster than ever, while letting the cutter do the work. The rail cutter is, in spite of the amazing power developed, surprisingly easy to control, thanks to its balanced construction and ergonomic design.
Specifications of the K 1260 Rail:
- Air-cooled two-cycle engine
- 119cc displacement
- 5.8kW power
- • Weight (without fuel or blade, inc. RA 10): 20.7kg (14in), 21.4kg (16in)
- Blade diameter: 350mm (14in), 400mm (16in)
- Cutting depth: 125mm (5in), 145mm (6in)
Having a stable fixture provides precise cuts. The arms of the patented RA 10 and RA 10 S fixture are short, and its joints have needle and ball bearings for the best stability possible. This not only makes the machine compact and easy to control, but also results in precise cuts on all levels. The rail saw attachment is fitted to the rail quickly and firmly. It provides right-angle cuts in all positions, with a folding guide to mark the exact location. The optional RA10S with a clamping width of up to 135mm is designed for the wider tram railway rail.
Posted in Arbil Rail |
